ISCO’s Snap-Tite pipe features the patented Snap-Tite joining system which will ensure an easy-to-install, reliable, water-tight seal. Snap-Tite is constructed of solid-wall polyethylene pipe and provides flexibility for lining obstructed culverts with the possibility of offset joints or slight bends.

Dimensions PDF(14K) is a downloadable file containing the information from this section of Culvert Lining.
Requires Adobe Acrobat Reader

	Pipe SDR	lbs/ft	I.D.	Minimum Wall Thickness
10" (10.750 OD)	32.5	4.75	10.088	0.331
12" (12.750 OD)	32.5	6.67	11.966	0.392
14 OD	32.5	8.05	13.138	0.431
16 OD	32.5	10.5	15.016	0.492
18 OD	32.5	13.3	16.892	0.554
16 OD	32.5	4.75	10.088	0.331
20 OD	32.5	16.41	18.77	0.615
22 OD	32.5	19.86	20.646	0.677
24 OD	32.5	23.62	22.524	0.738
28 OD	32.5	32.19	26.276	0.862
32 OD	32.5	42.04	30.03	0.985
36 OD	32.5	53.2	33.784	1.108
42 OD	32.5	72.37	39.416	1.292
47.2444 OD	32.5	91.62	44.336	1.454
54 OD	32.5	119.7	50.676	1.662
63.2 OD	32.5	163.46	59.02	1.945

Back to top

< PREVIOUS PAGENEXT PAGE >